Wood Lathe Tools
But before I could turn the piece, I had to true off the ends of the blank, which was cut about ΒΌ inch longer than necessary. Without truing …
I had worked with these blanks before, years ago, as well as others constructed in a similar manner. So, I knew that these blanks, consisting of a large …
I had one last piece of Ambrosia Maple from Kentucky. It was only about 2 inches thick to begin with and it had warped, limiting the final size …
To put it politely, working with Purpleheart can present some unique challenges. The wood is extremely hard and therefore can be quite difficult to machine or cut successfully. …
Yellowheart proved to be an absolute dream wood to work with. The wood cut with my Easy Wood Tools, especially the Easy Hollower #1, extremely easily and quite …
The first challenge in pricing American Osage Orange is ensuring that the listed wood is North American Osage Orange and not the tropical import. Very few if any …
Quite recently I had the opportunity to work with additional small pieces of Eastern Black Walnut when I decided to make two last-minute additional gift bowls for Christmas this …