Turning Tools
In the past, the most onerous part of the mill making process was without doubt the three drilling operations required. Depending on the kit one is using, the …
Prior to sanding however, I had to contend with the spongy interior of the antler, which was the area, when the bone was alive, through which blood was still …
Also, Bamboo is very high in silica, from 0.5% to a whopping 4% is found almost entirely in the outer layer of the stem. Because of this, care …
Unlike in some other timber groups, in this case, which group the wood you are proposing to use can matter. The most commonly important distinction is that White …
The finished and assembled razors and stands make a very nice group display. I think that each one will be impressive on its own when presented as a …
But before I could turn the piece, I had to true off the ends of the blank, which was cut about ΒΌ inch longer than necessary. Without truing …
I had worked with these blanks before, years ago, as well as others constructed in a similar manner. So, I knew that these blanks, consisting of a large …